{"id":6784,"date":"2022-05-03T12:00:10","date_gmt":"2022-05-03T19:00:10","guid":{"rendered":"https:\/\/mitchell11.wpenginepowered.com\/blog\/shopconnection\/suretrack-real-fix-honda-start-and-stall\/"},"modified":"2025-01-02T12:24:40","modified_gmt":"2025-01-02T20:24:40","slug":"suretrack-real-fix-honda-start-and-stall","status":"publish","type":"shopconnection","link":"https:\/\/mitchell1.com\/shopconnection\/suretrack-real-fix-honda-start-and-stall\/","title":{"rendered":"SureTrack Real Fix: Honda Start and Stall"},"content":{"rendered":"

\"\"<\/a>Real Fixes from Mitchell 1’s SureTrack\u00ae<\/a> expert information resource are documented issues from actual shop repair orders and community discussions. Read on to see how SureTrack can help you correct issues that are not easily diagnosed using OEM information alone. SureTrack is available at no additional cost in our ProDemand<\/a> product.<\/p>\n

\n

Intermittent stalling is not only annoying but can be dangerous. Best to get the car to your favorite shop for repairs. Follow this Real Fix to see how an intermittent stalling condition was diagnosed and resolved on this 2007 Honda accord.<\/p>\n

Vehicle<\/strong>
\n2007 Honda Accord LX 3.0L<\/p>\n

Title<\/strong>
\nVehicle Starts And Stalls Intermittently, replaced MAP sensor.<\/p>\n

Complaint<\/strong>
\nCustomer states the vehicle will start and then stall intermittently.<\/p>\n

Diagnostic Steps Performed<\/strong>
\nTest drove the vehicle and confirmed that the vehicle will start and stall intermittently, and the vehicle will intermittently stall while driving. The check engine light is illuminated, and the following codes are set: U0107 – Lost Communication with Throttle Actuator Module, P0135 – Oxygen Sensor Heater Malfunction (B1-S1), P0155 – Oxygen Sensor Heater Malfunction (B2-S1), P0489 – Exhaust Gas Recirculation “A” Control Circuit Low, P0641 – Sensor Reference Voltage Circuit Open.<\/p>\n

\"\"<\/p>\n

Cause<\/strong>
\nMeasured voltage to confirm the presence of reference voltage at the different components that are provided reference voltage, and found the vehicle’s manifold absolute pressure (MAP) sensor was physically damaged at where the connector seats. Wiggled the MAP sensor connector and found that the 5 volt reference would intermittently short to ground while the connector was being moved.<\/p>\n

Correction<\/strong>
\nReplaced the damaged MAP sensor, cleared codes, and confirmed the repair resolved the customer’s complaint.<\/p>\n

\n

SureTrack\u00ae adds to the power of ProDemand\u00ae<\/a> with an exclusive combination of real-world knowledge and powerful diagnostic tools, all wrapped in an interactive community of professional technicians. Designed to help automotive shops increase accuracy and efficiency from diagnosis to completed repair, the industry’s most comprehensive repair information resource is just a few clicks away.<\/p>\n

Want more? Here’s how you can see more Real Fixes in SureTrack:<\/strong><\/p>\n